RAM 1500 Truck 4WD V8-4.7L (2008)
Exhaust Pipe: Service and Repair
Tailpipe
Removal
3.7L/4.7L/5.7L ENGINE
1. Raise and support the vehicle.
2. Saturate the clamp nuts with heat valve lubricant. Allow 5 minutes for penetration.
3. Disconnect the exhaust tailpipe support hanger.
4. Remove clamps and nuts.
5. Remove the exhaust tailpipe.
Inspection
INSPECTION
Discard rusted clamps, broken or worn supports and attaching parts. Replace a component with original equipment parts, or equivalent. This will assure
proper alignment with other parts in the system and provide acceptable exhaust noise levels.
Installation
3.7L/4.7L/5.7L ENGINE
