RAM 1500 Truck 4WD V8-4.7L (2008)
1. Carefully install the A/C evaporator (3) into the upper half of the HVAC housing (2).
2. Install the foam seal (1) onto the tubes of the A/C evaporator.
3. Install the defroster-air doors (1) into the lower half of the HVAC housing (2).
4. Align the actuator coupler (3) with the defroster-air door pivot shaft and install the coupler into side of the HVAC housing. Be sure to install the
coupler with the coupler arm located between the two stop tabs on the HVAC housing.
5. Install the blend-air doors (1) into each of the two blend door plates (2).
6. Align the actuator coupler (3) with each blend-air door pivot shaft and install the coupler into side of each blend door plate. Be sure to install each
coupler with the coupler arm located between the two stop tabs on each blend door plate.
