RAM 1500 Truck 4WD V8-4.7L (2008)
1. Lubricate the transmission oil filter seal with MOPAR(R) AS68RC ATF.
2. Install the new transmission oil filter (2) in position on valve body (1) and into the oil pump.
3. Install the transmission oil filter bolts (3).
4. Tighten bolts to 10 Nm ( 88 in.lbs. ) torque.
5. Install a new transmission oil pan gasket.
6. Place pan in position on transmission.
7. Install bolts to hold pan to transmission. Tighten bolts to 7 Nm (62 in. lbs.) torque.
DRAIN PLUG
8. Install transmission drain plug bolt (1).
9. Tighten oil pan drain plug to 27 Nm ( 20 ft.lbs) torque.
10. Lower vehicle and fill transmission with MOPAR(R) AS68RC ATF. See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Service
and Repair/Procedures/AS68RC Automatic Transmission/Transmission Fill - AS68RC
