RAM 1500 Truck 4WD V8-4.7L (2008)
5. Install the axle nut (3) and tighten to 356 Nm (263 ft. lbs.).
6. Install the wheel speed sensor 2) to the hub and tighten the bolt (1). See: Brakes and Traction Control/Antilock Brakes / Traction Control
Systems/Wheel Speed Sensor/Service and Repair/Front Wheel Speed Sensor - Installation .
7. Install the disc brake rotor (1). See: Brakes and Traction Control/Disc Brake System/Brake Rotor/Disc/Service and Repair/Removal and
Replacement/Brake Rotor - Installation .
8. Install the hub extension (2) and nuts to the front rotor. Tighten nuts to 130 Nm (96 ft.lbs).
9. Install the brake caliper adapter with the caliper, See: Brakes and Traction Control/Disc Brake System/Brake Caliper/Service and Repair/Removal
and Replacement/Disc Brake Caliper Adapter - Installation .
10. Install the wheel and tire assemblies, See: Service and Repair/Removal and Replacement .
11. Remove the support and lower the vehicle.
12. Apply the brakes several times to seat the brake shoes and caliper piston. Do not move the vehicle until a firm brake pedal is obtained.