RAM 1500 Truck 4WD V8-4.7L (2008)
Pressure Regulating Solenoid: Service and Repair
42RLE Automatic Transmission
Removal
REMOVAL
1. Remove the valve body from the transmission. See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Valve Body/Service and
Repair/Removal and Replacement/42RLE Automatic Transmission/Removal
2. Remove the electrical connectors from the pressure control solenoid (1) and the line pressure sensor (2).
3. Remove the screws (6) holding the pressure control solenoid (1) and line pressure sensor (2) to the valve body.
4. Remove the pressure control solenoid and line pressure sensor from the valve body.
Installation
INSTALLATION
1. Install the pressure control solenoid (1) and line pressure sensor (2) into the valve body.
2. Install the screws (6) to hold the pressure control solenoid (1) and line pressure sensor (2) to the valve body.
3. Install the electrical connectors to the pressure control solenoid (1) and the line pressure sensor (2).
4. Install the valve body into the transmission. See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Valve Body/Service and
Repair/Removal and Replacement/42RLE Automatic Transmission/Installation
Removal