RAM 1500 Truck 4WD V8-4.7L (2008)
Wheel Speed Sensor: Service and Repair
Rear Wheel Speed Sensor - Installation
RWAL
REAR WHEEL SPEED SENSOR (RWAL)
1. Connect the harness to the sensor. Be sure the seal is securely in place between the sensor and the wiring connector.
2. Install the O-ring on the sensor (if removed).
3. Insert the sensor (1) in the differential housing (3).
4. Install the sensor shield.
5. Install the sensor mounting stud (2) and tighten to 24 Nm (200 in. lbs.).
6. Install the brake line on the sensor stud (2)and install the nut.
7. Lower the vehicle.
ESP
REAR WHEEL SPEED SENSOR (ESP)
1. Insert the wheel speed sensor (4) in the brake caliper adapter (2).
2. Install the sensor mounting bolt (1) and tighten to 24 Nm (200 in. lbs.).
3. Reconnect the electrical wiring connector (3) to the sensor (4).
4. Lower the vehicle.
4500 & 5500
REAR WHEEL SPEED SENSOR - 4500 & 5500
