RAM 1500 Truck 4WD V8-4.7L (2008)
h. With the wheels in the straight ahead position, make sure that both inner and outer steering drag link joint caps are centered over the joint ball
stud (Figure 6).
CAUTION:
Failure to center/align the drag link inner and outer joint
caps over the joint ball studs before tightening the drag link adjuster
sleeve clamps could cause joint failure.
i.
With the adjuster sleeve clamps rotated 45 degrees forward, tighten the drag link adjuster sleeve clamp nuts to 45 ft. lbs. (61 N.m).