RAM 1500 Truck 4WD V8-4.7L (2008)
b. Rotate the left tie rod until the bottom of the tie rod socket is parallel to the top of the left steering knuckle arm (Figure 8).
c. Tighten the tie rod adjuster sleeve clamp nuts to 45 ft. lbs. (61 N.m).
CAUTION:
Failure to align the left tie rod end parallel to the steering knuckle could cause tie rod end damage.
d. Return the vehicle to the customer.
6. Lower the vehicle from the hoist.
7. Drive the vehicle to verify that the steering wheel is straight.
>
If the steering wheel is turned to the left, shorten the drag link at the adjuster sleeve located on the drag link.
>
If the steering wheel is turned to the right, lengthen the drag link at the adjuster sleeve located on the drag link.
8. Repeat Step 7 until steering wheel is straight.
