RAM 1500 Truck 4WD V8-4.7L (2008)
Control Arm Bushing: Service and Repair
Installation
Lower Control Arm Bushings - 4X4 (LD)
LOWER CONTROL ARM BUSHINGS - 4X4 (LD)
FRONT BUSHING
NOTE: Extreme pressure lubrication must be used on the threaded portions of the tool. This will increase the longevity of the tool and insure
proper operation during the removal and installation process.
1. Install the new bushing (3) into the arm (4) using special tools C4212F (PRESS) (1), 9772-5 (receiver) (5) and 9772-1 (driver) (2)
REAR BUSHING
1. Install the new lower control arm bushing (4) into the lower control arm (3) using tools C-4212F (PRESS) (1), 9772-2 (driver) (5) and 9772-5
(receiver) (2).
2. Remove the control arm from the vise.
3. Install the lower control arm See: Service and Repair/Front Lower Control Arm - Installation .
4. Perform a wheel alignment See: Alignment/Service and Repair .
Upper Control Arm Bushings - IFS (LD)
UPPER CONTROL ARM BUSHINGS - IFS (LD)