RAM 1500 Truck 4WD V8-4.7L (2008)
4. Install hub bearing in the knuckle.
5. Install hub bearing bolts (1) and tighten to 200 Nm (147 ft. lbs.).
6. Install ABS sensor, brake rotor (1), hub extension (2), caliper adapter and caliper.
7. Install axle hub nut (3) and tighten nut to 330 Nm (243 ft. lbs.).
8. Bend axle shaft hub nut (3) collar into axle keyway with a hammer and punch.
Removal
REMOVAL
1. With the vehicle in neutral, position vehicle on hoist.
2. Remove propeller shaft.
3. Bend pinion flange (1) nut (2) collar lock out of the pinion shaft keyway.
