RAM 1500 Truck 4WD V8-4.7L (2008)
8. Remove Guide 10064 (1) from axle spindle (2).
9. Install hub bearing nut (1) with integrated lock washer (2).
NOTE: Integrated lock washer tab must be aligned with the spindle keyway.
10. Tighten hub (1) nut with Socket 10051 (2) to 95 Nm (70 ft. lbs.) while rotating the hub. Then back off nut 90 degrees and retighten nut to 41 Nm
(30 ft. lbs.).
NOTE: This will set hub to zero end-play.
