RAM 1500 Truck 4WD V8-4.7L (2008)
Shifter Transfer Case: Service and Repair
Transfer Case Shift Lever - Removal
NV241 GENII Transfer Case
REMOVAL
Transfer Case Shifter
1. Shift transfer case into 2H.
2. Raise and support the vehicle.
3. Loosen adjusting trunnion lock bolt and slide shift rod out of trunnion. If rod lacks enough travel to come out of trunnion, push trunnion out of
shift lever.
4. Lower vehicle.
5. Remove transfer case shifter knob cap.
6. Remove nut holding shifter knob (2) to shift lever.
7. Remove shifter knob.
8. Remove the shift boot from the shifter console.
9. Remove the bolts securing the shifter mechanism to the floor pan.
10. Separate shift lever mechanism from the vehicle.
NV271 Transfer Case
REMOVAL