RAM 1500 Truck 4WD V8-5.2L VIN Y (1997)
Parking Brake Cable: Service and Repair
Front Cable Replacement
REMOVAL
1. Remove knee bolster.
2. Release parking brake pedal completely.
3. Raise vehicle.
Extension-To-Front Cable Attachment
4. Loosen tensioner nut to create slack in front cable and extension cable.
5. Disengage front cable from extension cable connector. Extension cable can also be removed at this time if necessary.
6. Lower vehicle.
Cable Grommet In Floorpan
7. Roll back carpet and loosen cable grommet and cable retainer. Then pull cable through floor pan grommet and remove cable.
