RAM 1500 Truck 4WD V8-5.2L VIN Y (1997)
Timing Cover: Service and Repair
Removal
1. Disconnect the negative cable from the battery.
2. Drain cooling system.
3. Remove the serpentine belt.
4. Remove water pump.
5. Remove power steering pump.
6. Remove vibration damper.
7. Loosen oil pan bolts and remove the front bolt at each side.
8. Remove the cover bolts.
9. Remove chain case cover and gasket using extreme caution to avoid damaging oil pan gasket.
10. Place a suitable tool behind the lips of the oil seal to pry the oil seal outward. Be careful not to damage the crankshaft seal surface of cover.