RAM 1500 Truck 4WD V8-5.7L VIN D (2005)
3. CHECK THE (G10) SEAT BELT SWITCH SENSE CIRCUIT FOR AN OPEN
Measure the resistance of the (G10) Seat Belt Switch Sense circuit between the Seat Belt Switch connector and the Instrument Cluster C3
connector.
Q: Is the resistance above 5.0 ohms?
YES: Repair the (G10) Seat Belt Switch Sense circuit for an open. Perform BODY VERIFICATION TEST - VER 1. See: Powertrain
Management/Computers and Control Systems/Testing and Inspection/Diagnostic Trouble Code Tests and Associated Procedures/Verification
Tests/Body Verification Test
NO: Replace and configure the Instrument Cluster. Perform BODY VERIFICATION TEST - VER 1. See: Powertrain Management/Computers
and Control Systems/Testing and Inspection/Diagnostic Trouble Code Tests and Associated Procedures/Verification Tests/Body Verification Test
Seat Belt Warning Indicator Always on - Standard Cab
SEAT BELT WARNING INDICATOR ALWAYS ON - STANDARD CAB