RAM 1500 Truck 4WD V8-5.7L VIN D (2005)
Rear Door Exterior Handle: Service and Repair
EXTERIOR HANDLE
REMOVAL
1. Remove the front glass run channel, Refer to Window Track.
2. Disconnect the actuator rod (1) from the exterior door handle (2).
3. Remove the two nuts (3) that secure the exterior door handle to the door and remove the handle.
INSTALLATION
1. Position the exterior handle (2) into the door.
2. Install the two nuts (3) that secure the exterior handle to the door. Tighten the nuts to 10 N.m (89 in.lbs.).
3. Connect the actuator rod (1) to the exterior handle.
4. Install the front glass run channel, Refer to Window Track.