RAM 1500 Truck 4WD V8-5.7L VIN D (2005)
6. Remove the cup holder.
7. Operate the cup holder out of the vehicle. If the cup holder still binds it must be replaced. If it operates freely inspect the metal bracket (1) where
the cup holder fasteners attach as shown. If the bracket is bent, it could cause the cup holder to twist or distort when the screws are installed.
Straighten the bracket and install the cup holder. If the cup holder operates freely the repair is complete. if the cup holder still binds, it must be
replaced.
INSTALLATION
NOTE: A storage bin replaces the cup holder in the instrument panel when the vehicle is equipped with a floor console.
1. Position the cup holder (2) into the instrument panel.
2. Install the four screws (1) that secure the cup holder to the instrument panel. Tighten the screws to 2.2 N.m (20 in.lbs.).