RAM 1500 Truck 4WD V8-5.7L VIN D (2005)
Power Seat Switch: Testing and Inspection
The wiring information includes wiring diagrams, proper wire and connector repair procedures, details of wire harness routing and retention, connector
pin-out information and location views for the various wire harness connectors, splices and grounds.
1. Disconnect and isolate the battery negative cable.
2. Remove the power seat switch from the power seat.
Power Seat Switch Test Table
3. Using an ohmmeter to test the continuity of the power seat switches in each position. Refer to the POWER SEAT SWITCH TEST TABLE. If not
OK, replace the inoperative power seat switch.
