RAM 1500 Truck 4WD V8-5.7L VIN D (2005)
10. Remove the caliper adapter (1).
INSTALLATION
REAR
1. Install the caliper adapter mounting bolts (4). Tighten the mounting bolts to 135 Nm (100 ft. lbs.) LD or tighten to 197 Nm (145 ft. lbs.) HD.
2. Install the anti-rattle clips (2).
3. Install the inboard and outboard pads (1).
4. Install the caliper mounting bolts.
5. Install the tire and wheel assembly.
