dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Control Assembly, HVAC|Service and Repair > < Control Assembly, HVAC|Diagrams|Connector Views
Page 1
background image

Control Assembly: Description and Operation

MANUAL SINGLE ZONE

The A/C-heater control (1) for the manual temperature control (MTC) single zone heating-A/C system allows one temperature setting for the entire
vehicle. All controls are identified by ISO graphic symbols.

NOTE:  Manual A/C-heater control with optional A/C shown. Manual A/C-heater control without A/C similar.

The A/C-heater control and integral computer is located in the instrument panel and contains:

-

a push button A/C on/off control (2). The Snow-flake button contains an LED that illuminates when the optional A/C system is in operation.

-

a push button rear window defogger on/off control (3). The defogger button contains an LED that illuminates when the rear window defogger
system is in operation.

-

a rotary control knob for recirculation and mode control of the discharged air (4).

-

a rotary control knob for temperature control of the discharged air (5).

-

a rotary control knob for fan speed selection and turning the heating-A/C system off (6).

The A/C-heater control cannot be repaired and, if faulty or damaged, it must be replaced. The illumination lamps for the A/C-heater control are available
for service replacement.

MANUAL DUAL ZONE

The A/C-heater control (4) for the manual temperature control (MTC) dual zone heating-A/C system allows both the driver and the front seat passenger
the ability to individually regulate air temperature for their side of the vehicle. All controls are identified by ISO graphic symbols.

The dual zone A/C-heater control and integral computer is located in the instrument panel and contains:

-

a push button A/C on/off control (1). The Snow-flake button contains an LED that illuminates when the A/C system is in operation.

-

a push button MAX A/C air recirculation control (2). The Recirculation button contains an LED that illuminates when the recirculation function is
activated for high A/C demand.

-

a push button rear window defogger on/off control (3). The defogger button contains an LED that illuminates when the rear window defogger
system is in operation.

-

two slid-type control levers for individual driver and front seat passenger temperature control of the discharged air (5 and 6).

-

a rotary control knob for mode control of the discharged air (7).

-

a rotary control knob for fan speed selection and turning the heating-A/C system off (8).

The A/C-heater control cannot be repaired and, if faulty or damaged, it must be replaced. 

Control Assembly, HVAC|Service and Repair > < Control Assembly, HVAC|Diagrams|Connector Views