RAM 1500 Truck 4WD V8-5.7L VIN D (2005)
31. Position the blower motor resistor (7) and the blower motor (2) into the bottom of the HVAC housing (5).
32. Install the screws (4 and 6) that secure the blower motor resistor and the blower motor to the HVAC housing. Tighten the screws to 2.2 N.m (20
in.lbs.).
33. Connect the HVAC wire harness connectors (1 and 3) to blower motor resistor and the blower motor.
34. Position the recirculation door actuator (3) onto the air inlet housing (4) and install the retaining screws. Tighten the screws to 2.2 N.m (20 in.lbs.)
.
35. Position the mode door actuators (1) and the blend door actuators (2) onto the HVAC housing (5) and install the retaining screws. Tighten the
screws to 2.2 N.m (20 in.lbs.).
36. Connect the HVAC wire harness connectors to the actuators.
37. Install the HVAC housing assembly.
