dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Diagnostic Trouble Code Descriptions|Page 2534 > < Diagnostic Trouble Code Descriptions|Page 2532
Page 56
background image

7. CHECK FUSE #45

Turn the ignition off.
Using a 12-volt test light connected to ground, check the Horn fuse #45 in the IPM.

Q:  Is the fuse open?

YES:  Replace the fuse. Check for a short to ground in the Horn Relay Output circuit from the IPM to the horns. Perform BODY
VERIFICATION TEST - VER 1.  See: Testing and Inspection/Diagnostic Trouble Code Tests and Associated Procedures/Verification Tests/Body
Verification Test
NO:  Go To 8

8. HORN RELAY OUTPUT

Disconnect a horn connector.
With the DRBIII(R), actuate the Horn Relay.
Using a 12-volt test light connected to ground, check the Horn Relay Output circuit.

Q:  Does the test light illuminate brightly?

YES:  Go To 9
NO:  Go To 10

9. HORN GROUND CIRCUIT OPEN

Diagnostic Trouble Code Descriptions|Page 2534 > < Diagnostic Trouble Code Descriptions|Page 2532