dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Diagnostic Trouble Code Descriptions|Page 2544 > < Diagnostic Trouble Code Descriptions|Page 2542
Page 66
background image

Q:  Is the resistance below 5.0 ohms?

YES:  Repair the (B20) Brake Fluid Level Sensor Sense circuit for a short to ground. Perform BODY VERIFICATION TEST - VER 1.  See:
Testing and Inspection/Diagnostic Trouble Code Tests and Associated Procedures/Verification Tests/Body Verification Test
NO:  Go To 3

3. PARK BRAKE SWITCH

Turn the ignition off.
Disconnect the Park Brake Switch harness connector.
Turn the ignition on.
Observe the Brake warning indicator.

Q:  Did the Brake warning indicator illuminate briefly and then turn off?

YES:  Replace the Park Brake Switch. Perform BODY VERIFICATION TEST - VER 1.  See: Testing and Inspection/Diagnostic Trouble Code
Tests and Associated Procedures/Verification Tests/Body Verification Test
NO:  Go To 4

4. (B25) PARK BRAKE SWITCH SENSE CIRCUIT SHORT TO GROUND

Turn the ignition off.
Disconnect the Park Brake Switch harness connector.

Diagnostic Trouble Code Descriptions|Page 2544 > < Diagnostic Trouble Code Descriptions|Page 2542