RAM 1500 Truck 4WD V8-5.7L VIN D (2005)
11. INTEGRATED POWER MODULE
Turn the ignition off.
Remove the Front Control Module from the Integrated Power Module.
NOTE:
-
Check connectors - Clean/repair as necessary.
-
The test light is still connected to the C1 connector.
Momentarily jumper the Horn Relay Control circuit to ground at the FCM connector.
Q: Does the test light illuminate brightly?
YES: Replace the Front Control Module. Perform BODY VERIFICATION TEST - VER 1. See: Computers and Control Systems/Testing and
Inspection/Diagnostic Trouble Code Tests and Associated Procedures/Verification Tests/Body Verification Test
NO: Replace the Integrated Power Module. Perform BODY VERIFICATION TEST - VER 1. See: Computers and Control Systems/Testing and
Inspection/Diagnostic Trouble Code Tests and Associated Procedures/Verification Tests/Body Verification Test
All Gauges Inoperative
ALL GAUGES INOPERATIVE