RAM 1500 Truck 4WD V8-5.7L VIN D (2005)
-
Door latch
-
Instrument cluster
Diagnostic Test
1. DTC PRESENT
Turn the ignition on.
With the DRBIII(R), read DTC's.
Q: Does the DRBIII(R) display any Door Lock related DTC's?
YES: Refer to symptom list for problems related to Power Door Locks to diagnose and repair DTC's.
NO: Go To 2
2. INSTRUMENT CLUSTER
Turn the ignition off.
Disconnect the Instrument Cluster C1 connector.
Connect a jumper wire between the (P5) Door Unlock Driver Left Rear circuit in the Instrument Cluster C1 connector and ground.
Momentarily connect a fused jumper wire between the Fused B+ circuit and the (P393) Door Lock Driver Left Doors circuit in the Instrument
Cluster C1 connector.
Reverse the jumper wires to drive the motor in the opposite direction.
Q: Did the left doors lock and unlock?
YES: Replace the Instrument Cluster. Perform BODY VERIFICATION TEST - VER 1. See: Powertrain Management/Computers and Control
