RAM 1500 Truck 4WD V8-5.7L VIN D (2005)
Ambient Temperature Sensor / Switch HVAC: Service and Repair
REMOVAL
1. Open the hood.
2. Disconnect and isolate the battery negative cable.
3. Working on the underside of the hood, remove screw holding sensor to hood panel.
4. Disconnect the sensor electrical connector and remove sensor from vehicle.
INSTALLATION
1. Connect the sensor electrical connector.
2. Working on the underside of the hood, install screw holding sensor to hood panel.
3. Connect the battery negative cable.
4. Close the hood.