RAM 1500 Truck 4WD V8-5.7L VIN D (2005)
3. Gently lift on small plastic release tab (3) and rotate sensor about 1/4 turn counter-clockwise for removal.
4. Check condition of sensor O-ring.
INSTALLATION
The intake manifold air temperature (IAT) sensor (2) is installed into the front of the intake manifold air box plenum.
1. Check condition of sensor O-ring.
2. Clean sensor mounting hole in intake manifold.
3. Position sensor into intake manifold and rotate clockwise until past release tab.
4. Install electrical connector.
