RAM 1500 Truck 4WD V8-5.7L VIN D (2005)
INSTALLATION
1. Position the battery tray assembly (1) and install the retaining bolts (2).
2. Connect the left front fender ground wire.
3. Install the battery temperature sensor in the battery tray.
4. Install the cruise servo (3) (if equipped) and retaining screws.
5. Install the left front wheelhouse splash shield.
6. Install the anti-lock brake controller (if equipped).
7. Install the purge solenoid (6) on its mounting bracket.
8. Connect the wire harness retainers on the battery tray assembly
9. Install the Integrated Power Module (IPM) (5).
10. Install the battery (3).
Right Side
REMOVAL
