RAM 1500 Truck 4WD V8-5.7L VIN D (2005)
Pitman Arm: Service and Repair
PITMAN ARM
REMOVAL
1. Remove the drag link from the right knuckle and pitman arm (1) with Puller C-4150A (2).
2. Mark the pitman arm (2) and shaft positions for installation reference. Remove the nut (3) and washer (4) from the pitman arm (2).
3. Remove the pitman arm (1) with Puller C-4150A (2) or equivalent pitman arm puller tool.
INSTALLATION
1. Align reference marks and install pitman arm.
2. Install the lock washer and retaining nut on the pitman shaft and tighten nut to 251 Nm (185 ft. lbs.).