RAM 1500 Truck 4WD V8-5.7L VIN D (2005)
Steering Damper: Service and Repair
DAMPER
REMOVAL
1. Remove the steering damper mounting nuts and bolts.
2. Slide the damper from the isolation bushing.
3. Remove the damper.
INSTALLATION
1. Install the steering damper on the axle and isolation bushing. Tighten nut to 95 Nm (75 ft. lbs.).
2. Install the steering damper on the tie rod. Tighten nut to 81 Nm (60 ft. lbs.).
