RAM 1500 Truck 4WD V8-5.7L VIN D (2005)
1. Install the new lower control arm bushings (4) into the lower control arm using tools 8682-1 (driver) (3), 8682-5 (receiver) (6) and the two
bearings (2) with the threaded rod (1).
2. Make sure to properly orient the bushing with the voids (1&2) in the proper direction.
1. Remove the control arm from the vise.
2. Install the lower control arm.
3. Reset the vehicle ride height.
4. Perform a wheel alignment.