RAM 1500 Truck 4WD V8-5.7L VIN D (2005)
Inspect all the fluid seals on the valve body. Replace any seals that are cracked, distorted, or damaged in any way. These seals pass fluid pressure
directly to the clutches. Any pressure leak at these points, may cause transmission performance problems.
Assembly
ASSEMBLY
1. Lubricate valves, springs, and the housing valve bores with clean transmission fluid.
2. Install solenoid switch valve (1), manual valve (2), and the low/reverse switch valve (3) into the valve body.
3. Install the retainers to hold each valve into the valve body.
