RAM 1500 Truck 4WD V8-5.7L VIN D (2005)
6. Remove pinion nut.
7. Remove companion flange with (1) Remover C-452 (2).
8. Remove pinion seal with a pry tool or a slide hammer mounted screw.
INSTALLATION
1. Apply a light coating of gear lubricant on the lip of pinion seal.
2. Install seal with Installer 8695 (2) and Handle C-4171 (1).
3. Install companion flange onto the pinion with Installer C-3718 and Holder 6719A.
4. Position holder (2) against the companion flange and install four bolts and washers into the threaded holes. Tighten the bolt and washer so that the
