RAM 1500 Truck 4WD V8-5.7L VIN D (2005)
radiator shroud. Tighten the screws to 7 N.m (60 in.lbs.).
5. Reconnect the right headlamp and dash wire harness connector for the washer pump/motor unit to the motor connector receptacle (7).
6. Reconnect the right headlamp and dash wire harness connector for the washer fluid level switch to the switch connector receptacle (5).
7. Reconnect the reservoir washer hose (4) to the barbed nipple of the inline fitting at the engine compartment washer hose in the right headlamp and
dash wire harness.
8. Reconnect the coolant overflow hose (3) to the nipple on the radiator filler neck.
9. Refill the washer reservoir with the washer fluid drained from the reservoir during the removal procedure.
10. Reconnect the battery negative cable.
11. Check and adjust the coolant level in the coolant overflow bottle as necessary.
12. Close and latch the hood.
