RAM 1500 Truck 4WD V8-5.9L VIN Z LDC (1999)
Idle Speed/Throttle Actuator - Electronic: Service and Repair
Mounting Bolts (Screws) - IAC Motor
The IAC motor is located on the back of the throttle body.
REMOVAL
1. Remove air cleaner assembly.
2. Disconnect electrical connector from IAC motor.
3. Remove two mounting bolts (screws).
4. Remove IAC motor from throttle body.
INSTALLATION
1. Install IAC motor to throttle body.
2. Install and tighten two mounting bolts (screws) to 7 Nm (60 in. lbs.) torque.
3. Install electrical connector.
4. Install air cleaner assembly.