RAM 1500 Truck 4WD V8-5.9L VIN Z LDC (1999)
Fig. 3
NOTE:
Install the inboard clamp first. Make sure that the clutch line is routed through the lower body flange cutout (Figure 3).
31. Install the left front wheel well splash shield using the new plastic rivets.
32. Install the fuel line heat shield (Figure 4).
33. Lower the vehicle.
34. Cycle the clutch pedal several times to assure proper operation.
35. Check all hydraulic clutch connections to ensure that there are no leaks.
Customer Letter
SAFETY RECALL TO REPLACE YOUR TRUCK'S HYDRAULIC CLUTCH
Dear Dodge Ram Truck Owner:
