RAM 1500 Truck 4WD V8-5.9L VIN Z LDC (1999)
Auxiliary Power Outlet: Description and Operation
DESCRIPTION
An accessory power outlet is standard equipment on this model. The power outlet is installed in the instrument panel below the cigar lighter and
next to the ash receiver, which is located near the center of the instrument panel, below the radio. The power outlet base is secured by a snap fit
within the instrument panel. A plastic protective cap snaps into the power outlet base when the power outlet is not being used, and hangs from the
power outlet base mount by an integral bail strap while the power outlet is in use.
The power outlet receptacle unit and the accessory power outlet protective cap are available for service. The power outlet receptacle cannot be
repaired and, if faulty or damaged, it must be replaced.
OPERATION
The power outlet base or receptacle shell is connected to ground, and an insulated contact in the bottom of the shell is connected to battery current.
The power outlet receives battery voltage from a fuse in the Power Distribution Center (PDC) at all times.
While the power outlet is very similar to a cigar lighter base unit, it does not include the two small spring-clip retainers inside the bottom of the
receptacle shell that are used to secure the cigar lighter heating element to the insulated contact.
