RAM 1500 Truck 4WD V8-5.9L VIN Z LDC (1999)
Fig. 55
16. Install Gauge Block.
17. Install Gauge Block SP-6020 at the end of SP-526.
18. Install Cap Screw SP-536 and tighten with Wrench SP-531.
Fig. 56
19. Position Crossbore Arbor SP-6018 in the differential housing.
20. Center the tool.
21. Position the bearing caps on the arbor tool.
22. Install the attaching bolts.
23. Tighten the cap bolts to 14 Nm (10 ft. lbs.).
Fig. 57
