RAM 1500 Truck 4WD V8-5.9L VIN Z LDC (1999)
Fig. 16
5. If the rotating torque is to low, use Holder 6719 to hold the pinion yoke, and tighten the pinion shaft nut in 6.8 Nm (5 ft. lbs.) steps until proper
rotating torque is achieved.
6. Align the installation reference marks and attach the propeller shaft to the yoke.
7. Check and add lubricant to axle, if necessary.
8. Install brake rotors and calipers.
9. Install wheel and tire assemblies.
10. Lower the vehicle.