RAM 1500 Van V6-239 3.9L Magnum (1995)
INSTALLATION
1. Position the dome/cargo lamp bezel in the headliner opening and insert the bulb holder tabs in the bezel.
2. Align the bezel screw holes with the bracket screw holes.
3. Install the bezel retaining screws in the brackets. Tighten the screws with 4 Nm (35 in. lbs.) torque.
4. Install the lamp lens.
Map/Reading Lamp
MAP/READING LAMP REMOVAL
1. Remove the lamp housing retaining screws from the support bracket.
2. Disconnect the lamp wire harness connectors.
3. Remove the lamp housing from the bracket and headliner.
INSTALLATION
1. Position the lamp housing at the headliner opening.
2. Connect the lamp wire harness connectors.
3. Align the lamp housing screw holes with the bracket screw holes and install the retaining screws. Tighten the screws with 4 Nm (35 in. lbs.)
torque.
