RAM 1500 Van V6-239 3.9L Magnum (1995)
Radiator: Service and Repair
1. Disconnect battery ground cable, then drain cooling system.
2. Remove upper hose clamps and hoses, then the overflow tank hose from filler neck fitting.
3. Remove fan shroud mounting bolts, then move shroud to rear on engine.
4. Remove top mounting bolts.
5. On models equipped air conditioning, remove grille, then remove condenser mounting bolts.
6. Raise and support vehicle.
7. On models equipped with automatic transmission, disconnect transmission cooler lines.
8. Remove lower radiator hoses.
9. On models equipped with automatic transmission, remove cooler lines, then cap or plug line openings.
10. While holding radiator in place, remove two lower mounting bolts, then carefully lower radiator from vehicle.
11. Reverse procedure to install.
