RAM 1500 Van V6-239 3.9L Magnum (1995)
Tires: Technical Service Bulletins
Tire/Wheel Assembly - Match Mounting
NO: 22-06-95
GROUP: Wheels & Tires
DATE: Jun. 16, 1995
SUBJECT:
Match Mounting of Tire/Wheel Assemblies During Wheel Service
MODELS:
1995 (BR) Ram Truck
1995 (AN) Dakota
1995 (AB) Ram Van/Wagon
Note
THIS PROCESS MUST BE PERFORMED ON ALL VEHICLES THAT ARE CURRENTLY RECEIVING CERTIFICATES FOR CHROME
WHEELS FROM THE ASSEMBLY PLANT.
DISCUSSION:
The following information is provided for use when matching a new wheel to an existing tire. The tire and wheel assemblies on some Dodge trucks and
vans are being marked for match mounting. This provides for improved ride characteristics and is being phased in on all truck wheels. This bulletin
provides a procedure to mark and match mount tires during wheel service/replacement when the factory tire mark/sticker is no longer present.
IDENTIFICATION:
Michelin tires are marked with a florescent yellow sticker on the tire sidewall. Goodyear tire sidewalls were marked with a paint dot prior to
mid-February 1995 and now have a similar sticker as the Michelin tires.
Note
THESE TIRE MARKINGS ARE EASILY REMOVED AND MAY NOT BE PRESENT FOLLOWING DEALER NEW CAR PREP.
New wheels are marked with a temporary florescent yellow sticker on the wheel flange and in the wheel well with an permanent "X" (Figure 2).
TIRE MARKING/MATCH MOUNTING PROCEDURE:
1.
It is extremely important that prior to dismounting the old tire and wheel assembly, a mark be made showing exactly where the tire is mounted on
the wheel. A mark should be applied across the wheel flange and the tire sidewall (Figure 1).
