RAM 1500 Van V6-239 3.9L Magnum (1995)
3. Install a new O-ring onto the exposed end of each fuel injector, lightly lube each O-ring with clean motor oil.
4. Install the fuel injectors and fuel rail into the intake manifold and tighten fuel rail mounting bolts to 20 ft-lbs (27 Nm).
5. Install the intake air duct.
6. Connect the negative battery cable, and Install the fuel tank filler cap.
7. Connect the DRB II scan tool and select the Automatic Shut Down (ASD) Fuel System Test to pressurize fuel system and check for leaks.
CAUTION: Unless the test is stopped or the ignition switch is turned to the OFF position the fuel pump relay and the ASD relay will remain
energized for 7 minutes by the ASD Fuel System Test.
