dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Fuel Pressure Regulator|Locations|Page 2173 > < Fuel Pressure Regulator|Locations|Page 2171
Page 1
background image

Fuel Pressure Regulator: Service and Repair

Pressure Relief/Rollover Valve

NOTE:  On this engine the fuel filter and fuel pressure regulator are one combined part. 

WARNING:  The fuel system is under constant pressure, even when the engine is OFF. Always release fuel pressure before servicing any
fuel system component. 
 

REMOVAL

1. Release fuel system pressure.  See: Fuel Filter/Fuel Pressure Release/Service and Repair
2. Disconnect negative battery cable.
3. Raise and support vehicle.
4. Drain fuel tank and remove tank.

Filter/Regulator Assembly Removal And Installation

5. The fuel filter/regulator assembly is pressed into a rubber grommet. Remove by twisting and pulling strait up.

CAUTION:  Do not pull filter/regulator more than three inches from fuel pump module. Damage to coiled fuel tube may result.

Fuel Pressure Regulator|Locations|Page 2173 > < Fuel Pressure Regulator|Locations|Page 2171