RAM 1500 Van V6-3.9L VIN X (1997)
Power Seat Switch: Service and Repair
REMOVAL
1. Remove the seat as described in Power Seat Adjuster and Motors.
Seat Switch And Bezel Remove/Install
2. Remove the two screws that secure the switch and bezel unit to the seat from the inside of the seat cushion frame.
3. Pull the switch and bezel out from the seat far enough to access the switch wire harness connector. Carefully release the locking tabs and separate
the wire harness connector from the switch body.
4. Remove the two screws that secure the switch to the bezel and remove the bezel.
5. Reverse the removal procedures to install.