RAM 1500 Van V8-5.2L CNG VIN T (1999)
Fig. 5
3. Disconnect the outside handle latch rod from the latch lever (Fig. 4) and (Fig. 5).
4. Remove the nuts that attach the handle to the door panel. Remove the handle from the door.
INSTALLATION
1. Position the handle on the door panel with the handle latch rod inserted in the opening. Insert the handle studs into the panel holes.
2. Attach the handle latch rod to the latch lever.
3. Install the nuts that attach the handle to the door panel.
4. Install the door trim panel.