RAM 1500 Van V8-5.2L CNG VIN T (1999)
9.
Disconnect the MAP sensor, idle air control (IAC) motor and throttle position sensor (TPS) electrical connectors (Figure 2).
10.
Disconnect the fuel low-pressure sensor, low-pressure fuel shut-off solenoid and fuel temperature sensor electrical connectors (Figure 3).
11.
Disconnect the low-pressure fuel line from the low-pressure fuel shut-off solenoid (Figure 4).
IMPORTANT:
A copper washer (gasket) is placed between the fuel line and the solenoid. Note the direction of the washer when removing the fuel line.
