RAM 1500 Van V8-5.2L CNG VIN T (1999)
Idle Speed/Throttle Actuator - Electronic: Service and Repair
IDLE AIR CONTROL MOTOR
MAP Sensor, TP Sensor, IAC Motor
The IAC motor is located on the back of the throttle body.
REMOVAL
1. Remove engine cover.
2. Remove air cleaner assembly.
3. Disconnect electrical connector from IAC motor.
Mounting Bolts (Screws)-IAC Motor
4. Remove two mounting bolts (screws).
INSTALLATION
1. Install IAC motor to throttle body.
2. Install and tighten two mounting bolts (screws) to 7 Nm (60 in. lbs.) torque.
3. Install electrical connector.
4. Install air cleaner assembly.
5. Install engine cover.
