RAM 1500 Van V8-5.2L CNG VIN T (1999)
Steering Column Tie-Wraps
13. Remove the two lower wire harness tie wraps.
14. Remove the screw from the center of the steering column wire harness connector and disconnect the two halves of the connector.
15. Disengage the two multi-function switch wire harness connectors (one 17-way and one 13-way) from the steering column wire harness insulator.
Multi-Function Switch Remove/Install
16. Remove the two screws that secure the multifunction switch to the steering column.
17. Remove the multi-function switch from the steering column.
INSTALLATION
1. Position the multi-function switch onto the steering column.
2. Install and tighten the two screws that secure the multi-function switch to the steering column. Tighten the screws to 6 Nm (53 in. lbs.).
3. Engage the two multi-function switch wire harness connectors (one 17-way and one 13-way) in the steering column wire harness insulator. Be