RAM 1500 Van V8-5.2L CNG VIN T (1999)
Suspension Strut / Shock Absorber: Service and Repair
Front
REMOVAL
Front Shock Absorber
1. Remove shock absorber upper nut, retainer and bushing from the shock stud.
2. Raise vehicle, remove the lower bolts and remove shock from the lower suspension arm.
INSTALLATION
1. Install the lower retainer and bushing on the upper stud. Insert the shock absorber through the lower suspension arm and into the frame hole.
2. Install the lower shock bolts and tighten to 23 Nm (17 ft. lbs.).
3. Install the upper grommet and retainer on the shock absorber stud. Install the nut and tighten to 34 Nm (25 ft. lbs.).
